Inhoudsopgave
Hoe lang duurt cavitatie behandeling?
Tijdens de behandeling Een behandeling duurt in totaal ongeveer 30 minuten (per zône), die u één keer per week of twee weken ondergaat. Het totaal aantal behandelingen is afhankelijk van het gewenste resultaat en de dikte van de vetlaag. Een cavitatiekuur bestaat in de meeste gevallen uit maximaal 6 behandelingen.
Wat is het verschil tussen Coolsculpting en cryolipolyse?
Cryolipolyse of ‘Coolsculpting’ is een methode waarbij onderhuidse vetcellen sterk worden gekoeld. Dit gebeurt met een apparaat dat de huid, inclusief de vetlaag, vacuüm zuigt en vervolgens met een temperatuur van -11 graden Celsius bevriest. Hierdoor koelen de vetcellen onder de huid af tot ca. 4 graden Celsius.
Hoe ontstaat cavitatie?
Het ontstaat wanneer de voordruk in een pomp lager is dan de dampdruk van de vloeistof, dit verschijnsel ontstaat als een pomp onvoldoende gevuld wordt. Oorzaken hiervan zijn een te kleine toeloopleiding, te lage druk in het toeloopvat, te hoge toerentallen of een te hoge dampdruk.
What is cavitation and how can you prevent it?
Cavitation is a condition that can affect any fluid flow system. Despite it being an ever-present threat, it is not well understood. In the simplest possible terms, cavitation involves the formation of water vapor bubbles that damage metal components when they collapse back to the liquid phase.
When was cavitation first discovered?
As early as 1754, the Swiss mathematician Leonhard Euler (1707–1783) speculated about the possibility of cavitation.
What is cavitation inception?
When a volume of liquid is subjected to a sufficiently low pressure, it may rupture and form a cavity. This phenomenon is coined cavitation inception and may occur behind the blade of a rapidly rotating propeller or on any surface vibrating in the liquid with sufficient amplitude and acceleration.
How does cavitation erode a surface?
After a surface is initially affected by cavitation, it tends to erode at an accelerating pace. The cavitation pits increase the turbulence of the fluid flow and create crevices that act as nucleation sites for additional cavitation bubbles. The pits also increase the components’ surface area and leave behind residual stresses.