Inhoudsopgave
Hoeveel Hertz is 4G?
In Nederland wordt voor 4G gebruik gemaakt van 800MHz, 900MHz, 1800MHz, 2100MHz en 2600MHz. Voor 5G is dit vooralsnog 700MHz en 1800MHz, maar dit worden later meer. Voor 3G wordt in Nederland vooral de 2100MHz band gebruikt, maar ook 900MHz is in gebruik. 2G is in Nederland ingezet op de 900MHz en 1800MHz banden.
Wat is LTE Cat 4?
4G is een afkorting van “vierde generatie” en wordt ook wel LTE genoemd, LTE staat voor Long Term Evolution. Via 4G kun je een stuk sneller internetten dan 3G (HSDPA) en net als 3G bellen op het 4G-netwerk met VoLTE.
Hoe kom je aan 4G netwerk?
4G is snelweg met meerdere banen én een spitsstrook. Dus ook al is het druk, kun je nog steeds snel internetten. In cijfers: de snelheid van 3G ligt tussen de 100 Kb en 10 MB per seconde, terwijl je met 4G tot 1000 Mbit per seconde kunt halen!
Waar staat de G van 4G voor?
4th generation (4G) is de vierde generatie van mobiele-telecommunicatiestandaarden. Het is de opvolger van de 3G-standaard die in 2010 zijn hoogtepunt bereikte met 3.9G, ook wel ‘Pre-4G’ genoemd.
What is uplink&downlink?
In the world of telecommunications & networks, uplink & downlink essentially mean upload and download. Other terms such as upstream and downstream also apply. For cellular devices such as smartphones & tablets, uplink and downlink pertain to the data speed and coverage we know as 3G, 4G LTE, and newer radio frequencies such as 5G.
What is UPLINK and downlink frequency in GSM?
In GSM frequency range from 890 MHz to 915 MHz is used as uplink frequency where as 935 MHz to 960 MHz is used as downlink frequency. Refer GSM system tutorial>>. What is Downlink? The frequency used for all the transmissions from Base Station to the Mobile Subscriber Unit (MS) is known as downlink frequency.
What is the difference between uplink and downlink in VSAT?
Refer VSAT System Overview>> . In GSM network, the packet transmission from MS to BTS is known as uplink where as from BTS to MS is known as downlink. In GSM frequency range from 890 MHz to 915 MHz is used as uplink frequency where as 935 MHz to 960 MHz is used as downlink frequency.
What is the difference between Ul and downlink?
I will distinguish between two cases in which Uplink and Downlink (UL and DL from now on) are interchanged. If we take the typical Ka-band for satellite communication, we see that the UL is around 30 GHz, while the DL lays around 20 GHz.