Is er verschil tussen SDS en SDS-plus?
SDS-PLUS is de opvolger van SDS. De SDS-PLUS aansluiting heeft ten opzicht van de SDS aansluiting twee extra groeven. Daardoor heeft de boorkop meer grip op de boor tijdens de rotatie. SDS-PLUS boren passen wel in een SDS boorkop, maar andersom niet.
Kan SDS Max in SDS-plus?
Hamerboor met SDS Plus of SDS Max aansluiting Bij een SDS plus en Max aansluitingen zijn inkepingen in de schacht aangebracht waardoor deze extra vergrendeld wordt in de machine, hierdoor kan er meer kracht uitgeoefend worden. Zie links de SDS Max aansluiting en rechts de SDS Plus aansluiting.
What is the difference between SDS and SDS bits?
The head of an SDS drill bit works to break up the concrete similar to the head of a standard hammer drill bit. Lastly, a bit’s carbide tip works with the head to break up the concrete. It’s generally brazed which makes the head of the bit much stronger than it would otherwise be. SDS vs. SDS Plus vs. SDS Max: What Are the Differences?
What is an SDS bit shank and how does it work?
The shank overall works the same way as a standard drill bit. The big difference, though, is that an SDS bit shank has four grooves on it that fit into the drill’s collar. The grooves guide the bit to allow it to rotate, as well as ensuring the bit doesn’t fall out of the chuck.
Are SDS and SDS plus drills interchangeable?
SDS and SDS Plus bits are interchangeable since they’re both 10mm diameter and the latter is just a modernized version of the former. SDSMax bits are, at 18mm diameter, larger and thus do not work with SDS and SDS Plus drills. With SDS being outdated and replaced by SDS Plus, the latter is the most commonly used type of the format on the market.
What are the different sizes of SDS tools?
There are three standard sizes of SDS: SDS-plus (or SDSplus or SDS+), SDS-Top and SDS-max. SDS-plus is the most common by count of tools manufactured, with masonry drills from 4 mm diameter to 30 mm (and from 5/32″ to 1-1/4″) diameter ordinarily available.