What is shiplap?

What is shiplap?

Shiplap was originally used to refer to thin wood boards that have two opposing rabbet joints that overlap each other, giving the boards a tight seal to keep the wind and weather out. This overlap creates a little shadow between the boards that make homeowners swoon.

Is it shiplap if the boards don’t overlap?

Whether a wall is covered with new or old wood, if the boards do not have that groove for overlapping, it is technically not shiplap. But at the end of the day, who really cares if your walls look great?”

What happened to the shiplap trend?

With a high profile program like Fixer Upper going by the wayside, many of the decorative trends the show promoted simply ran their course through some of the designs and styles portrayed, along with the overly obsessive concern with shiplap. Excessive use of shiplap in almost every home drove the trend even further off the cliff.

What size shiplap do I need for my Room?

The 1×6-inch shiplap is the most common shiplap board size and is usually installed horizontally or vertically. After selecting a size, you’ll want to measure the space you are looking to cover by length and width. Multiply the length by width to get the square footage, and input the result into the coverage calculator.

A little light internet research reveals that shiplap is a kind of wooden board that’s often used for constructing sheds, barns, and other rustic buildings. Traditional shiplap has a rabbet (or groove) cut into the top and bottom, which allows the pieces to fit together snugly, forming a tight seal.

Can shiplap be installed in your home?

If you’re interested in installing shiplap in your home, consider the following tips and tricks. What Is Shiplap? Shiplap paneling takes its name from the horizontal planks once used to construct boats. Thanks to the grooves cut into the top and bottom of the boards, builders could fit shiplap panels tightly together to keep out the water.

Why are shiplap boards used as sheathing?

Thanks to the grooves cut into the top and bottom of the boards, builders could fit shiplap panels tightly together to keep out the water. In fact, shiplap boards were so effective that builders began adapting the material for use as exterior sheathing on homes to block cold winds.

Is shiplap a good choice for interior interior finishes?

Lately shiplap has become a popular choice for interior finishes too, thanks to its rustic charm and subtle texture. ( Fixer Upper would lead you to believe that nearly every home in the Waco area is covered in it.)

What is the difference between shiplap and beadboard and V-groove?

How to tell the difference between shiplap, beadboard, and V-groove cladding? “Unlike bead board and V-groove, which are connected via tongue and groove, shiplap boards are joined with an overlapping ‘rabbet’ joint, which usually creates a 90 degree-angled gap in between the boards,” writes Justine.

Does shiplap need to be level when installing?

Experts say you can’t go too wrong with installing shiplap: so long as everything is measured with care, it’s fairly forgiving. Whether you start with the top board and work your way down, or start with the bottom and work your way up, just be sure the first board is level, since the rest will follow suit.

What is the size of a shiplap wall?

Exterior walls. Shiplap is either rough-sawn 25 millimetres (1 inch) or milled 19 mm (3⁄4 in) pine or similarly inexpensive wood between 76 and 254 mm (3 and 10 in) wide with a 9.5–12.7 mm (3⁄8–1⁄2 in) rabbet on opposite sides of each edge.

What is the best way to order shiplap?

Shiplap Direct – The easiest, fastest, and most affordable way to order Shiplap. Shiplap Direct is the easiest, fastest, and the most affordable way to order Shiplap. With the absolute highest quality products, the largest mix of products, and an expansive local dealer network – we are able to make your shiplap dream a reality.

Shiplap refers to a special type of inter-locking board, similar to tongue-and-groove but with a tighter, overlapping fit. These wooden panels are easy to install, create an effective seal, and are an increasingly popular style choice for the inside of homes—from modern to rustic.

What are the latest trends in shiplap walls?

Another growing trend is to use traditional painted shiplap walls but leave other nearby wood— such as beams, rafters and flooring—unpainted and rustic. The combination of the two types of wood is particularly inviting. In addition, look to see what it takes to install a shiplap ceiling.

Can you use shiplap walls in a farmhouse kitchen?

The farmhouse is a classic example for a shiplap wall, and nowhere do they shine more than in the kitchen. And if you want a charming country kitchen that’s a pleasure to use, install shiplap walls (although you may also want to make room for backsplashes). Originally Published: August 27, 2019